The Pink & White Coco Worm creates a calcareous tube approximately ½ inch in diameter and 5”-8” long. The tubes come bent in all sorts of shapes. Coco worms use their radioles, or crowns, to filter plankton from the water. When disturbed the Coco Worm can retract quickly into its tube and close its operculum to shut the top of its tube for safety.
It is important that proper calcium (420-440 ppm), alkalinity (8-9.5 dkh - run it 7-8 if you are carbon dosing) , and magnesium levels (1260-1350 ppm) are maintained. Raising magnesium levels gradually up to 1400-1600 ppm can help to combat algae outbreaks, just keep CA and Alk in line as you raise the Mg. Nitrates should be below 10 ppm and phosphates should be below .10 ppm. We recommend doing a water change when Nitrate levels rise to 10 ppm. It is important to replace your phosphate media when phosphates rise to .10 ppm. Media Reactors make the most efficient use of your phosphate media by fluidizing it.
Vivid Aquariums uses and recommends dosing pumps to automate the dosing of additives and keep your levels more constant. A dosing pump can alleviate the chore of manually dosing your aquarium with Ca, Alk, & Mg 2,3, or 4 times per week and will benefit your aquarium by keeping your levels constant through frequent small additions of Ca, Alk, & Mg. Our tanks all progressed when we switched from 3 manual dosings per week to 70 automatic dosings per week and we got a lot more work done.
When placing Coco Worms in the aquarium you may bury them in the sand with the crown end of the tube protruding from the sand, or stick them in a hole in the rocks with the crown end facing outward. If they are retracted and you don’t know which end is which, lay them on the sand bed until they open and then place them into position.
Offer the Pink & White Coco Worm phytoplankton and marine snow - target feeding is recommended.